26
2023
-
05
Introduction to some related usage knowledge of outdoor photography lights
【概要描述】The basic lighting principle of outdoor lighting is similar to that of indoor studios. But technically speaking, effect control has its own particularity.
The basic lighting principle of outdoor lighting is similar to that of indoor studios. But technically speaking, effect control has its own particularity.
1. The exposure setting of the camera must be fully manual, and any camera's automatic metering and automatic exposure program cannot sense the exposure of the flash moment;
When using an external light, the photographer must have an understanding of the exposure characteristics of the external light. The instantaneous luminous duration of the external light is very short, so the camera control for controlling the exposure of the external light is only related to the aperture and sensitivity settings, and is not related to the shutter speed;
When the external shooting light and sunlight are working simultaneously, as sunlight is a continuous light source, the setting of the shutter speed directly affects the sensitivity of sunlight. Therefore, due to the special nature of the exposure of the two light sources mentioned above, a special external shot control technology for the external shot light has emerged: first, set the aperture size to control the external shot light exposure, and then adjust the shutter speed within the synchronous range of the external shot light to control the natural light exposure. Effectively utilizing this special technology can create very special artistic effects;
When shooting with an external light, the subject should be separated from the selected environment by a certain distance. Place the subject and environment within the irradiation range of different light sources, making it easy to control their respective exposure.
How to connect the external camera light?
When connecting the outdoor light, first connect the socket plug to the BL-WPD output socket. Connect with direction, align before inserting. BL-WPD is equipped with a buzzer control synchronization device. When the external light on the camera flashes, BL-WPD will also flash synchronously. Turn on the power switch on the BL-WPD chassis. At this point, the charging indicator light turns red. When the flash circuit is fully charged, the reading indicator light turns green and a beep sounds, indicating that the callback has been completed.
External lighting is a photography product that can serve as a light supplement. Generally, portraits are only taken under natural light, with the sun being the main source of light for the subject and environment. The application of environmental reflection and reflective materials (such as reflective panels) can only play an auxiliary role, and the intensity, angle, and light quality are inevitably constrained by the characteristics of sunlight at that time.
The specific usage method of the external camera light is as follows:
1. Fully charge the battery: Push the battery cover on the BL-WPD chassis to the right, insert the 12V3AH nickel hydrogen battery into the chassis (pay attention to the direction of the battery, but do not completely insert it incorrectly), and cover the battery cover. Insert the matching charger into the (AC110V-220V) power supply, and the charging indicator light on the charger will turn green. Insert the DC plug at the output end of the charger into the DC ON charging socket of the external spotlight, and the green light on the charger will turn red to start charging the battery. After charging for about four hours, the red light on the charger turns green again, and the charging is complete.
2. Connect the socket plug of the lamp holder to the BL-WPD output socket. Connect with direction, align before inserting.
3. Turn on the power switch on the BL-WPD chassis. At this point, the charging indicator light reads red. When the flash circuit is fully charged, the reading indicator light turns green and a beep sounds, indicating that the callback has been completed (you can choose whether to emit a beep). If you check whether the device is working properly, you can press the test camera light button to test the camera light.
Relevant Content