Service Support

29

2023

-

05

What is an outdoor light? What are the techniques for using exterior lighting?


【概要描述】Outdoor light is a photography product that uses flash lights similar in appearance and performance to those used in cinemas. It can also be used as indoor and studio lights, but with the same power, the price is slightly higher than pure indoor lights.

Outdoor light is a photography product that uses flash lights similar in appearance and performance to those used in cinemas. It can also be used as indoor and studio lights, but with the same power, the price is slightly higher than pure indoor lights.
The basic lighting principle of outdoor shooting lights is similar to that of indoor studios, but technically, the effect control has its own particularity. Firstly, the exposure settings of the camera must be fully manual, and any camera's automatic metering and exposure program cannot sense the exposure of the flash moment. When using flashing lights, photographers must have a good grasp of the exposure characteristics of the flashing lights. The instantaneous emission of a flash is usually within one thousandth of a second, with a short duration. Therefore, the camera control for controlling the exposure of the flashing light is not related to the shutter speed, but only to the aperture and sensitivity settings. No matter how it changes, as long as the shutter speed is within the synchronization range of the flashing light, and as long as the aperture and sensitivity settings remain unchanged, the exposure of the flashing light remains the same.
Due to the fact that sunlight is a continuous light source, the setting of the shutter speed is directly related to the sensitivity of sunlight when both the external flash light and sunlight are applied simultaneously. Therefore, due to the special nature of the exposure of the two light sources mentioned above, a special flash light external shot control technology has emerged: first, set the aperture size to control the flash light exposure, and then adjust the shutter speed within the sync range of the flash light to control the natural light exposure. Effectively utilizing this special technology can create very special artistic effects. We can use the environment as the light source and the subject as the main light source. Select and fix the correct aperture value for the main flash exposure, and then adjust the shutter speed during shooting. At this point, the exposure of the subject has been fixed by the aperture without any changes, which can greatly dim the ambient brightness, separate from the environment, and highlight the subject.
When shooting with an external light flashing, the subject should maintain a certain distance from the selected environment. In order to facilitate individual exposure control, the subject and environment are within the irradiation range of different light sources. Unlike the light characteristics of flashing lights, the lines of light when the sun shines on objects on the ground are almost parallel. A flashing light is a point light source, and there is an inverse square relationship between the illumination at different distances and the brightness of the object. That is to say, when the distance between the flashing light and the subject is reduced to half of the original, the brightness of the subject will be four times that of the original, while the output power of the flashing light remains unchanged. Therefore, photographers can effectively use distance adjustment to control the brightness and coverage of flashing lights. Generally speaking, the closer the flashing light is to the subject, the stronger the light effect on the subject, and instead, it is more integrated with the environment.
The special flash light for external shooting can be equipped with many lighting accessories, and adding a soft mask can make the light quality very soft. Using a light barrier can make the light more accurate, and you can change the color of the light by inserting chips of different colors. If external light is only used as supplementary light under natural light conditions, it can directly illuminate the reflector at any desired position to generate supplementary light for the main body, making the intensity more controllable and the position adjustment more free.

Relevant Content