29
2023
-
05
Do you know some tips for using exterior lighting?
【概要描述】Outdoor light is a type of photography product, and the appearance and performance of the flash used for outdoor photography are similar to those used in cinemas. It can also be used as indoor and studio lights, but the price for the same power is slightly higher than that of pure indoor lights. The use of outdoor lighting is quite similar to that of studio lighting, and the metering process is also very similar. However, the former is mainly used for outdoor scenes, while the latter is more suitable for indoor lighting. So, let's introduce the techniques for using external lighting.
Outdoor light is a type of photography product, and the appearance and performance of the flash used for outdoor photography are similar to those used in cinemas. It can also be used as indoor and studio lights, but the price for the same power is slightly higher than that of pure indoor lights. The use of outdoor lighting is quite similar to that of studio lighting, and the metering process is also very similar. However, the former is mainly used for outdoor scenes, while the latter is more suitable for indoor lighting. So, let's introduce the techniques for using external lighting.
Tips for using external lighting: 1. Determine ISO sensitivity. ISO sensitivity can be said to be the basis of light measurement. Before using the exposure meter to determine the exposure value, it is recommended to determine the ISO sensitivity to be used before subsequent light measurement. If encountering low light environments or indoor scenes, it is recommended to slightly increase ISO when shooting with external shooting lights.
Tips for using external shooting lights 2. Shutter speed and background brightness. Many people's concept of shutter speed is limited to the role of condensing the subject, and shutter speed is an important key factor affecting the background in the process of external camera photography. Simply put, when the camera shutter is opened, external shooting light emits a synchronous flash to illuminate the model. The remaining time after the flash ends and before the shutter retracts is the time when the camera can receive the ambient light source on site. The faster the shutter speed of the camera, the shorter the time it takes to absorb ambient light, so except for the model, the background will appear dim, and vice versa. After understanding the relationship between shutter speed and background brightness, enter the shutter speed to be used in the exposure meter according to the shooting requirements, and then perform subsequent light metering.
Tips for using external lighting: 3. Fix the aperture value. After setting the ISO sensitivity and shutter speed, the aperture value is set. The key to determining the aperture size is not the camera itself, but the output light of the external camera. Before metering, synchronize the external light with the metering through wireless or wired means, and then place the exposure meter parallel to the model's face, with the white photosensitive sphere on the metering table facing the external lighting lamp holder. Press the metering button on the metering table. After the external light is irradiated, a group of data will be obtained on the light meter, which is the exposure value recommended by the exposure meter.
Tips for using external shooting lights 4. The angle of light filling determines the three-dimensional effect of the portrait, and the position of the external shooting light is an important key to determining the three-dimensional effect of the portrait. If the position is not appropriate, the light and shadow of the entire photo will be too flat. Therefore, during the shooting process, the position of the external shooting light should be adjusted at any time according to the on-site environmental light source, in order to fully exert the ideal fill effect.
No matter what position and angle you use to fill in the light, you cannot ignore that the model itself is the key, so when shooting, pay attention to the interaction between the light and the model. Here we mainly introduce the use of a single external shooting light, as there is no second external shooting light to balance the light difference between the left and right. Therefore, when lighting from the side direction, gray shadows will definitely form in the backlight part of the model.
Relevant Content